Exhaust Requirements
31
M414905
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 15
NOTE: Do not install wire mesh or screen in
exhaust duct opening to avoid lint build-up or
impacting proper discharge of air from tumblers.
NOTE: Where exhaust duct pierces a combustible
wall or ceiling, the opening must be sized per local
codes.
NOTE: Inside of duct must be smooth. Do not use
sheet metal screws to join sections.
Consult your local building code for regulations which
may also apply.
TMB2103N
1
Removable strip of panel in framing wall to permit removal of tumbler from framing wall
2
Partition or bulkhead
3
Minimum distance between exhaust opening and roof, ground or other obstruction: 36 in. (914 mm)
4
2 in. (51 mm) minimum clearance on both sides of duct
5
Exhaust airflow – maximum length of duct: 14 ft. (4.3 m)
TMB2103N
1
2
3
4
5
Summary of Contents for AT050E
Page 2: ......
