V1.0 Created on Apr 10
th
2013
King Golden Ltd.
Speed Passion Reventon Pro 1.1 - 2 cell LiPo User Manual
Page 5
Picture A: Wiring with a brushless motor
4.2
Brushless Motor Wiring
Connecting to a sensored brushless motor
When using a sensored motor, it is necessary to connect the sensor cable to the “SENSOR”
socket on the ESC and the sensor port on the motor. The ESC can automatically identify the
motor type (sensored or sensorless) by detecting the signal coming from the SENSOR socket.
WARNING! When using a sensored brushless motor, the A, B, C wires of the ESC MUST
connect with the motor wire A, B, C respectively. Do not change the wire sequence!
The motor sensor cable must be a non-crossover wire.
Connecting to a sensorless brushless motor
When using a brushless motor without a Hall Sensor, the #A, #B, #C wires of the ESC can be
connected with the motor wires in any order. If the motor runs backwards, swap any two of
the motor wire connections.
5.
On / Off the ESC
ON:
Connect ESC to receiver, turn on transmitter and then press set up button to turn on the
ESC.
OFF:
Hold the setup button for 2 seconds and wait for Red flashing LED. When the Red LED is
done flashing, release the setup button and the ESC will shut off.
