Gnome-P
43
Figure 10 – The record settings window
Attention!
It is impossible to set a missing (past) start time on the timers.
The Voice Activation group-box allows you to enable automatic recording start at a preset sound level
(VA threshold). This threshold can be set within the 0…60 dB range; the minimum step is 2 dB. Current input
level indicator displayed below can be used for reference.
The Loop record group-box is used to enable loop record mode and set the desired loop length
(hours:minutes). When the set time period has elapsed, new data will be recorded over previous recordings.
Thus, regardless of the overall recording session duration, the amount of actually recorded data will
correspond to the specified loop length.
In the Local erase button group-box the following functions can be assigned to the voice recorder erase
button (7 in Figure 1):
•
Use for playback;
•
Use for erase;
•
Locked.
To save current settings in a separate file on the PC hard drive use the
Save to file
button. To restore
previously saved settings press
Load from file
.
