User Guide
38
6.4.1 Playback recordings
If playback function is selected, then to play the last recording stored at the flash memory, plug
headphones in the respective jack at the voice recorder case and press the erase button (7 in Figure 1). To
stop playback press the button again.
6.4.2 Deleting recordings
If erase function is selected, then to quickly erase all recordings from the voice recorder memory, press
the voice recorder erase button (7 in Figure 1) and hold it down for about 3 seconds. The red LED (6 in
Figure 1) will light up and will be on continuously until the deletion process is over. All recordings will be
removed from the voice recorder memory.
Attention!
Information deleted from the voice recorder flash memory can not be recovered.
6.5 RESET button
In the lower part of the voice recorder case the
RESET
button is situated (8 in Figure 1). Use this button
to reset the voice recorder if it hung up. You can press the RESET button only by means of some very thin
object (e.g. clip). All the voice recorder settings are stored in the device memory.
