Dashcam Installation
1. Insert the plug of the In-Car Charger into the cigarette lighter socket of the car;
2. Insert the Mini-USB plug of the In-Car Charger into the USB slot of the device;
3. Fix the device on the dash board by using the sticking bracket. You might use the
suction bracket to replace the sticking bracket and fix the device on the front windshield.
Back Camera Installation
1. Insert the plug of the back camera into the connection port of the connection cable
(6.5m, Wire A);
2. Insert the plug of the connection cable(6.5m, Wire A) into the AV-IN hole of the
dashcam;
3. Tear off the protection film from the sticker on the back camera;
4. Stick the back camera above he license plate and adjust the recording angle.
Note: If Wire A is not long enough for your car(such as pickup or truck), you might
use another extension cable(either Wire B or Wire C) in the package.
7
