Spectur Guide for HD5 Installation
1300 802 960 | www.spectur.com.au
13
Step 2:
Check that the front of the pole is facing
in the direction of the area you wish to
monitor. To ensure this, align the pole
such that the two top bolt holes (these
will be used for the winch, shown in red)
on the side are at 90
°
to the area you
wish to view. This is done so that the
winch faces the right way. Using a spirit
level on 2
sides check
that the pole
is vertical.
Step 3:
Once the pole
is vertical
pour 2 or 3 bags
of
KwikSet
concrete into the hole. Pour
roughly 4.4L or
6.6L (2.2L per 20kg) of water into the
hole, then stir the concrete using a spade or pick until
