23
1.
Press
Display
.
2.
Press
Set
.
Select Parameter
To Be Set
(↑↓)
3.
Scroll to the
’
Configure
Radio
’
screen.
CONFIGURE RADIO
Press SET
5.
Press
Set
again to configure radio.
6.
When finished, the screen will go back to Current
Values.
4.
Press
Set
to bring up the
configuration screen.
Press SET Again
To Config Radio
Configuring the Wireless Radio Address
The numerical address of the remote transceiver must be
entered into SpecWare software to facilitate wireless
communication. The weather station can set the address
to be the same as the station
’
s serial number.
1.
Press
Display
.
2.
Press
Set
.
Select Parameter
To Be Set
(↑↓)
3.
Scroll to the
‘
Set North
’
screen.
SET NORTH
Press SET
pointer of the weather vane should be pointed north.
5.
Press
Set
again to complete calibration.
6.
When finished, the screen will briefly display
“
DONE
”
then go back to Current Values.
4.
Press
Set
to bring up the
calibration screen. The
Hold Vane North
Press SET Again
Calibrating the Wind Vane
When the weather station is initially placed in the field or
moved, the wind direction must be calibrated. The follow-
ing procedure will allow you to establish accurate wind
direction readings.