0190236 Page 4 of 10
Phillips
screwdriver
Tools Required
Cordless drill with
Phillips driver
(best)
or
3. Install worksurface
1. Set the worksurface onto the base.
Figure 3
.
2. Align the mounting holes and secure with 1/4-20 x 5/8” PHM screws.
(The screws will attach to the worksurface reinforcement bars).
Figure 3
4. Install filler panel
1. Place the grommet panel under the worksurface at the flat edge.
Figure 4
.
2. Align the mounting holes and secure with (2) #10 x 3/4” PHSM screws.
3. Install in grommet.
Figure 4
Phillips
screwdriver
Tools
Required
Filler panel
(2) #10 x 3/4” PHSM
Worksurface
Base
Grommet
