Spectrum Monaco Quad 'C6x VME64 Page 3 Technical Reference Manual Download | Manualshive

Page: 3 / 92

background image

Spectrum Signal Processing

Monaco Technical Reference

Preface

Part Number 500-00191

iii

Revision 2.00

Preface

Spectrum Signal Processing offers a complete line of DSP hardware, software and I/O
products for the DSP Systems market based on the latest DSP microprocessors, bus
interface standards, I/O standards and software development environments. By delivering
quality products, and DSP expertise tailored to specific application requirements,
Spectrum can consistently exceed the expectations of our customers. We pride ourselves
in providing unrivaled pre- and post-sales support from our team of application
engineers. Spectrum’s excellent relationships with third party vendors provide customers
with a diverse and top quality product offering.

In 1994, Spectrum achieved ISO 9001 quality certification.

Spectrum’s Applications Engineers are available to provide technical support Monday to
Friday, 8:00 AM to 5:00 PM, Pacific Standard Time.

Telephone

1-800-663-8986 or (604) 421-5422

Fax

(604) 421-1764

Email

[email protected]

Internet

http://www.spectrumsignal.com

To help us assist you better and faster, please have the following information ready:

•

A concise description of the problem

•

The names of all Spectrum hardware components

•

The names and version numbers of all Spectrum software components

•

The minimum amount of code that demonstrates the problem

•

The versions of all software packages, including compilers and operating systems

At Spectrum, we know that accurate and easy to use manuals are important to help you
develop your applications and products. If you wish to comment on this manual, please
e-mail us at [email protected] or fax us at (604) 421-1764. Please
include the following information:

•

The full name, document number, and version of the manual

•

A description of any inaccuracies you may have found

•

Comments about what you liked or did not like about the manual

It may be helpful for us to call you to discuss your comments. If this would be acceptable
please include your name, organization, and telephone number with your comments.

Note:

Spectrum board products are static sensitive and can be damaged by electrostatic

discharges if not properly handled. Use proper electrostatic precautions whenever
handling Spectrum board products.

About

Spectrum

Contacting

Spectrum

Customer

Feedback

«
1
2
3
4
5
...
»

Summary of Contents for Monaco Quad 'C6x VME64





























































































Reviews:

No comments

Related manuals for Monaco Quad 'C6x VME64

ShareCenter DNS-320L

Brand: D-Link Pages: 4

Brand: D-Link Pages: 38

Web Smart DES-1210-28P

Brand: D-Link Pages: 6

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 23

Express EtherNetwork DI-604

Brand: D-Link Pages: 7

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 97

IntelliJack NJ200

Brand: 3Com Pages: 4

Brand: Danfoss Pages: 61

Brand: Tripp Lite Pages: 20

Brand: RAIDAGE Pages: 60

Extreme Gaming VGA Cooler GV1000

Brand: ZALMAN Pages: 7

Brand: Giacomini Pages: 2

Brand: Arbor Technology Pages: 8

Mustang-M2AE-MX1

Brand: IEI Technology Pages: 58

Brand: Lanner Pages: 99

Brand: Beckhoff Pages: 84

Brand: Wistron NeWeb Pages: 32

Cyclades CS4008

Brand: Avocent Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands