Spectrum
TM
10
7. Valve Programming Set-Up
7.1. Programming
Parameter
Option
Description
Mode of Regeneration
R-1
Chronometric
R-2
Volumetric immediate
R-3
Volumetric delayed
R-4
Adaptive brining
R-5
Filter: Chronometric
R-6
Filter: Volumetric immediate
R-7
Filter: Volumetric delayed
Parameter
Option
Description
Brine Flow Direction
t-df
Down flow regeneration
t-uf
Up flow regeneration
For your softener, please choose the
t-df
setting.
Parameter
Option
Description
Frequency of regeneration or calendar
forcing
F-xx
Volumetric: Calendar forcing every x days
Chronometric: No of days between regenerations
F-of
Volumetric: Calendar forcing disabled
Chronometric: Weekly mode activated
This is a regeneration override function. Typically, it is used as a “holiday” mode. When there is no regeneration
after a determined number of days, the override will trigger a regeneration. Input the number of days to override
regeneration.
1.
To enter ‘Master Programming Mode’ set the time to 23:45 and press the next ( ) button for 8 seconds.
The recommended options for your system have been highlighted below
in green.
The values to input based on your individual installation have been highlighted In yellow below.
2.
Navigate through the options using the up ( ) and down ( ) arrows.
5.
To select the appropriate option press the next ( ) button.
6.
To select the appropriate option press the next ( ) button
7.
To select the appropriate option press the next ( ) button.
R-2:
Volumetric immediate triggers the regeneration as soon as the capacity of the resin has expired.
R-3:
Volumetric delayed will trigger the regeneration at the time set in the programming, once the capacity expired.
3. Select
R-2
or
R-3
depending upon your application requirements. Details of each regeneration type can be
seen below.
4.
To select the appropriate option press the next ( ) button.
