background image

26”D

[66 cm]

15.25”W

[38.7 cm]

7”D

[17.8 cm]

0120237R4 Page 12 of 17

Accessories

(Customer-installed when purchased separately)

15RU Rack Cube - 55384

12RU Rack Cube - 55197

•  Provides the ability to integrate 

equipment remotely before 

installation into the lectern 

•  One rack cube can be installed 

into the Link Lectern

•  Polyethylene slides on bottom for 

easy removal 

•  Can be secured to base panel

•  Cooling fan compatible

•  Color: black

Rack rail:

15RU front and rear (41”H Link)

12RU front and rear (36”H Link)

Dimensions 15RU 

Cube:

19.125”W [48.58 cm] x 19.031”D [48.34 cm] x 

26.625”H [67.63 cm]

Dimensions 12RU 

Cube:

19.125”W [48.58 cm] x 19.031”D [48.34 cm] x 

21.375”H [54.29 cm]

Mounts for cooling 

fans:

Compatible with most 4.7” fans with 4.13” mounting 

hole spacing (12 mounting locations available)

Unit weight:

21 lb [9.5 kg] 15RU Cube

19 lb [8.6 kg] 12RU Cube

Shipping weight:

23 lb [10.4 kg 15RU Cube

22 lb [10 kg] 12RU Cube

15RU (41”H Link)

12RU (36”H Link)

Note: Power and communication wiring for document cameras, laptop 

computers, and/or projectors placed on the flip-up shelf should be routed 

on top of the audience-side of the shelf.  Use of the shelf grommet hole 

for wiring will result in pinching of the cords when the shelf is folded.

Flip-Up Shelf - 55385

•  Shelf hinges lock into place in the upright position

•  Includes 2” grommet

•  Available in White Chalk Dry Erase laminate

•  Two height-positions available

Weight capacity:

35 lb [15.9 kg]

Dimensions:

15.25”W [38.7 cm] x 26”D [66 cm] x 1”H [2.54 cm]

Unit weight:

13.25 lb [6 kg]

Shipping weight:

17 lb [7.7 kg]

Note: The unit requires a 7” diameter of clearance to work with 

Qi-enabled phones placed in any orientation.  The 3” dia cutout 

should be located on the worksurface at least 3.5” from any edge.  

Cutout required:

3" dia 

(by customer)

Input:

DC 5V 

(with included DC5V.2A power adapter)

Output:

5W max 

(with included DC5V.2A power adapter)

Power cord:

8’ [244 cm] with DC jack

Dimensions:

3.5” dia [8.9 cm] x 1.125”H [2.9 cm]

Shipping weight: 1 lb [.45 kg]

EM Wireless Charging Pad - 99057

•  Uses electromagnetic technology to charge Qi V1.2 compliant IC devices

("Qi" enabled)

• 

LED to confirm pairing / charging

•  Security tab prevents theft

•  Requires 3” round cutout to be made by customer

• 

UL-certified

Summary of Contents for Link Lectern Media Manager Series


















Reviews: