0120237R4 Page 10 of 17
Note: The max cutout areas shown
are general recommendations only.
The final location of the cutout(s) on
the panel will be determined by:
• The size of the cutout(s)
• Location preference of each device
(left, centered, right)
• The vertical depth of the installed
device
• The available worksurface opening
under the overbridge on your
specific Spectrum lectern.
Overbridge
Section View
2”
Grommet
Note: The Overbridge Control Console
™
has been designed
for many of the currently available controllers on the market,
however, modified cutouts should be reviewed by Spectrum
to ensure clearance of brackets, keyboard slides, or other
objects under the worksurface.
Contact Spectrum to specify cutout size(s) and location(s).
Cutouts can be made in the blank insert panel by the
customer after the lectern has been purchased, but are
only recommended within the cutout area shown.
Figure 8B
Figure 8C
Overbridge panel
Worksurface opening below
Worksurface
Rack Cube
Max cutout area