11
The FieldScout TDR meter will function properly under normal
conditions experienced in field use. The sensor block is sealed
and will not be damaged by immersion in water. The display is
not
waterproof, so it should not be used during heavy rainfall or
left exposed during irrigation events. If the display does get wet, it
should be dried out immediately.
Follow these tips to prolong the life of the device:
-
Store in a cool and dry place when not in use.
-
Keep the meter and probe rods clean and dry in between uses.
-
Remove the batteries if not used for an extended period of time
(ie: between seasons).
Battery life
If the battery level is low or a
battery is inserted incorrectly,
the low battery icon appears on
the screen and the display will
power off.
Battery life is affected by the
enabled features, accessories
connected, and the frequency of use. If not needed, the Bluetooth,
GNSS Location and backlight features can be disabled. The back-
light can also be set to AUTO mode (p. 8). This allows enough
time to see the reading and conserve the battery. The chart below
gives a rough estimate of the number of readings that can be taken
given certain configuration parameters.
Meter Care
Total Readings
Bluetooth
GPS
Backlight
Alkaline
Lithium
ON
ON
ON
12,000
24,000
ON
ON
OFF
24,000
35,000
OFF
OFF
OFF
150,000
225,000
