manualshive.com logo in svg

Spectrum Technologies Field Scout TCM 500, Manual

Share
Download
Spectrum Technologies Field Scout TCM 500 Manual Download Page 6

6 

Allow the temperature of the TCM 500 meter to 
equilibrate with the turf environment prior to sampling.   
 
When the TCM 500 meter is first turned on, the battery 
strength (

Battery at __ %

)

 

will appear on the LCD.  The 

available battery power percentage assumes alkaline 
batteries are being used.  If rechargeable NiCd batteries 
are installed, the available battery power will be more than 
displayed.  If the data logging option has not been 
enabled, the unit will then proceed to the standard reading 
mode.   
 
In order to record data and global positioning system 
(GPS) coordinates, the data logger must first be enabled 
through the software (See p. 16).  If the data logger has 
been enabled, battery strength and the amount of 
remaining memory (

Memory __ % FULL

) will be 

displayed.  If GPS data is being recorded as well, the 
meter will display the status of the GPS signal.  The meter 
will then proceed to the standard reading mode.   
 

IMPORTANT:  

The 

GPS 

unit must be powered up,  

have located the satellites and been connected to the meter 
before turning the meter on (see Connecting to GPS Unit 
p. 8).  

Initial Startup 

Summary of Contents for Field Scout TCM 500

























Reviews:

No comments

Brands by name

Popular brands

Load more brands