10
Keypad Operation
The
ON
button turns the meter on and off.
When the meter is turned on, it will dis-
play the battery status for 3 seconds. The
screen will then display the amount of
memory available and the status of the
GPS connection. The meter then goes into standard read-
ing mode. See below for a sample sequence of meter
power-up screens.
CAUTION:
If the meter is inactive for 10 minutes, it will
automatically turn off to conserve power. When the meter
is powered off, either with the ON/OFF button or due to
inactivity, the AVG and N values are reset to zero (see
Standard Reading Mode, p. 12)
ON
BATTERY AT 85%
V7.0
Battery status screen
LOGGER 28% FULL
NO GPS FOUND
LOGGER 35% FULL
GPS=YES DGPS=YES
Logger and GPS status
screens
When the DELETE/CLR AVG but-
ton is pressed and immediately re-
leased, the last data point will be and
the running average. Pressing and
holding this button will reset the run-
ning average (
AVG
) and
N
-value to
zero.
Delete
Clear Avg
