Spectrum Techniques ICS-PCI, User Manual

Page: 28 / 43

28
Peak Report...Switches the currently selected window to display a summary Peak Report. If regions of interest have
been set around peaks in a spectrum, the Peak Report provides a convenient method of displaying peak information in
tabular form. Readout will be in energy units if the energy calibration is active.
Data Report...Switches the currently selected window to display a detailed Data Report. Reports includes all
hardware settings, counting parameters and spectrum data. ROI data is reported by lower and upper channels set, gross,
net, FWHM, centroid, all channels and corresponding counts.
Overlay...allows the user to turn the Overlay function on/off. Overlay allows for visual comparison of two datasets within
the same window. If no data is assigned to the overlay buffer, this function is disabled.
Iso Match...allows the user to turn the IsoMatch Marker on/off once the isotopes have been selected using Show
Isotope Menu.
Show Isotopes...allows the user to select the isotopes to be marked in the spectrum.
The isotope library may be modified by clicking on Edit... clicking on Iso Match...
Pixel Size...allows the user to change the size of the pixels used to draw the spectrum data in the spectrum data window.
Overlay...allows the user to turn on or off the Overlay function. Click on Overlay to toggle the function status. A check
mark signifies enabled.
Overlay Buffer...Selects from available data buffers for overlay operation. The Overlay Storage Buffer may be loaded
with Background Spectra or, if in File Mode, with Master Spectra, to be superimposed over the Master Buffer for visual
comparison.
Overlay File...Selects from previously stored spectrum files for overlay operation.
Settings
Set Bkg...