24
Menu Bar
Many advanced functions are possible via the pulldown menus. This section describes each operation in the sequence
they appear. Black letters indicate the function is operational, gray indicates not-operational, highlighted indicates the
function that will be activated when the mouse button is released or the 'Enter' key pressed..
File
Open...allows user to go the DATA FILE, retrieve stored spectrum (ssf) file, open file in a selected buffer.
Data may be saved in any location available to your computer. By default, data files are stored in a sub-directory under
the
program starting directory. The default directory for data is named 'dataxxxx' where 'xxxx' is the running card's serial
number.
When auto calibration is performed, related spectra are stored in a 'calxxxx' directory. The content of cal directories are
cleared
at the start of each calibration but are not automatically removed at the end of the process. Stored data files and card cal
and
data directories are not automatically deleted when uninstalling the software.
Save...allows user to save data to a file using its previous file name.
Save As...allows user to save data to a file using a new or previous file name.
Choose binary (.SSF) or spreadsheet (tab (TSV) or comma (CSV) separated) format.
Load Setup...
Save Setup...
Once the ICS-PCI has been setup and calibrated, all operating parameters may be stored (SAVE SETUP) as a disk file
for subsequent retrieval. If power has been turn off, it is a simple and convenient process to reload the setup file and
quickly restore (LOAD SETUP) the analyzer to its previous operating condition.
High Voltage must be turned on after loading setup !
Load Library...allows user to LOAD from file the default library or a customs library into the IsoMatch directory.
Summary of Contents for ICS-PCI
Page 11: ...11 Normal Program Window...
Page 14: ...14...
