0112776R4 Page 7 of 9
Worksurface cutouts
Note: Cutouts in the worksurface can be made by the
customer after the table has been assembled, but are only
recommended within the maximum cutout area shown
in
Figures 7A & 7B
. Cutouts made beyond this shaded
area could interfere with the legs, cord channel rails, or
worksurface reinforcement bars.
Note: When locating cutouts in the worksurface, consid-
eration should be given to avoid the draw bolts along the
worksurface seam. See draw bolt location dimensions.
maximum cutout area
maximum cutout area
draw bolt
draw bolt
Figure 7A
Figure 7B
