Flip-up shelf operation -
optional
0119327R1 Page 8 of 18
1. If your lectern is equipped with an upper metal logo panel,
loosen the (2) worksurface screws, and detach by sliding the
logo panel slightly to the right using the keyhole slots.
Figure 7
.
2. The upper panel attaches to the lectern with rare-earth magnets.
To remove the panel, pull out the keyboard tray and use a
yardstick to push the panel out from the instructor-side. Make
sure the panel does not drop to the floor by having a second
person secure the panel while it is being pushed out.
CAUTION
Keep clear of pinch points during shelf movement.
Do not exceed 50 lb [22.68 kg] of weight on shelf.
Operation
The shelf will automatically lock into place when lifted into the horizontal
position with the levers released.
Figure 6B
. To lower or flip-up the
shelf, press and hold the shelf bracket levers while slowly lowering or
raising the shelf. Do not exceed a maximum of 50 lb of weight on the
shelf. Do not move the unit while the shelf is in the horizontal position.
Release lever
(press here)
Figure 6A
Figure 6B
Shelf
Audience-side rack cube access
Note: 1RU at the top of the rack cube may
not be fully-accessible from the audience-
side. The rack cube can be fully-accessed
from the instructor-side.
Hinged lower
panel
1. Raise the lectern all the way up.
2. Lift up the hinged lower panel to 90-degrees and push
toward lectern to lock in place.
Figure 8.
3. Unlock the keyed lock and remove the audience-side
panel to access the rack cube.
Figure 8
Keyed lock
(accessible by
flipping-up hinged
lower panel)
Removable locking
audience-side panel
Audience-side access
Upper metal logo panel
(if equipped)
(Attaches to lectern
worksurface with pre-
installed screws and
keyhole slots)
Figure 7
Upper panel
