Tools Required
Figure 5A
Figure 5C
Quick-
release
lever
Removable Rack Cube
The removable rack cube (12RU) simplifies installation and provides the ability to integrate equipment remotely.
The cube can be installed into the lectern at a later date. The cube also provides mounting capabilities for multiple
cooling fans if necessary. (Fans should be installed inside cube). Compatible with most 4.75” cooling fans with
4.13” mounting hole spacing (12 mounting locations available).
Figure 5D
.
1. To remove the rack cube, open or remove the door.
Figure 5A
.
2. Remove the upper and lower bumper stops with a 4mm hex wrench.
Figure 5B
.
3. Unscrew the #14 x 7/8” PHSM screw from the base, and slide out the cube.
Figure 5C
.
Phillips
screwdriver
Removable 12RU
Rack Cube
Removable door
(can be installed to be
hinged on left or right-side)
4mm Hex
wrench
Figure 5B
Lower bumper stop
Upper bumper stop
0119327R1 Page 6 of 18
(1) #14 x 7/8
PHSM to secure
cube to base
