0192005 Page 2 of 4
1. Open cart doors to gain access.
2. Unplug all cords from timer.
3. Pull down on each snap button to release the
timer while pulling timer out of the cart.
Figure 1
.
1. Remove existing timer
1. From outside cart, slide the timer into the slot
in the side of cart until ‘clicks’ are heard. The
clicks are the snap buttons locking the timer into
place.
Figure 2
.
2. Plug power cords into timer.
Timer replacement (slide-in style)
Existing backstop plate for
eLogix timer or power switch
(backstop not included)
Note: Backstop not used with
PowerProdigy timers
eLogix
™
Timer
Power switch
2. Install new timer
PowerPr
odigy
™
Timer
Figure 1
Figure 2
Note: Cord bracket is not included or needed
on the Connect30 or Connect18 / 36.
3. Connect cords
Cord Bracket
Power Cords
Timer
1. Plug cords back into timer.
Figure 3
.
2. If your cart has a cord bracket, route the cords over the bracket.
Figure 3
Snap button
Timer / power option
Snap button