\ÇáàtÄÄtà|ÉÇ `tÇâtÄ
DIGITAL PROGRAMMABLE TIMER
Electrostatic Discharge:
The inputs and outputs can be damaged by
electrostatic discharge, thus care must be taken when handling the
electronic circuit boards. Failure to observe proper handling and
installation procedures can cause damage. Electrostatic Discharge damage
can range from performance degradation to complete product failure.
Important Safety Instructions
Please follow these precautions when using this product:
Read these instructions. Keep these instructions. Heed all warnings. Follow
all instructions.
WATER AND MOISTURE:
Designed for indoor use only. The product is
not protected against liquids. It should not be exposed to dripping or
splashing and no objects filled with liquids, shall be placed on the product.
INSTALLATION:
The timer must always be installed by qualified service
personnel. Install in accordance with the manufacturer's instructions.
Always disconnect the supply power before installing the unit. Do not
install near any heat sources such as radiators, heaters, or other
apparatus that produce heat.
POWER SOURCES:
The unit should be connected to a power supply only
of the type described in the operating instructions or as marked on the
unit.
SERVICING:
Contains no user serviceable parts. Do not attempt to repair
the product, as this will void the warranty.
BATTERY:
This product contains Nickel Metal Hydride batteries. There is
danger of explosion if the battery is incorrectly replaced. Replace only with
an equivalent battery as found in the operating instructions. Make sure the
battery is installed with the correct polarity. Discard used batteries
according to manufacturer’s instructions or local environmental protection
guidelines.
