Safety
Hardware Package Contents
Tools Required
Assembly / Setup
Remote Tray Installation
0107155R1 Page 2 of 10
1. Open the document camera drawer.
2. Unwrap the included remote tray.
3. Set the wider side of the remote tray into the drawer as shown.
Figure 1
.
• Read this owner’s manual before assembly or operation.
• Do not allow children to move lectern.
• Move slowly and carefully when mobile.
• For indoor use only. Do not install or store the unit where it will be
exposed to weather. Keep unit dry.
• For added safety, plug the unit into a grounded three-prong receptacle
controlled by a GFI
(Ground Fault Interrupter) circuit breaker.
Phillips
Screwdriver
Figure 1
remote tray
document
camera drawer
2” x 3” Velcro
®
pads
(2) 0110254-Hook
(2) 0110255-Loop
4mm hex
wrench
jigsaw or router
drill
pencil
masking
tape
drill bit
measuring
device
To make cutouts in optional OCC insert panel:
