Accent
panel
Brace
Styrene backer
Slot
0192437 Page 2 of 4
1. Attach the adhesive styrene angle behind the accent panel in the
center.
4. Attach styrene angle inside accent panel
2. Secure backer panel with screws
1. Position backer panel tight to worksurface.
2. Install (4) #8 x 1/2” PHTS screws at the locations
shown to secure the backer.
3. Repeat on other backer panel.
#8 x 1/2” PHTS
(4 required)
9.375
.5
2.5
9.375
.5
2.5
.5
Existing hole
Existing hole
Backer panel on
audience-side
Styrene
angle
Accent
panel
3. Remove brace securing styrene backer
X2
X2
X2
