2
0192437 Page 3 of 4
1. Attach (2) 4” LED tape strips to the each side of the styrene
angle with LED bulbs pointing up and down.
2. Connect the tape strips with a 6” interconnection cable.
5. Attach LED tape to styrene angle
4” LED
tape light
6” interconnect
cable
Styrene angle
1. Connect the LED components as shown and make sure
all 4 tape strips light up.
6. Connect LED components
4” LED tape
4” LED tape
72” interconnection cable
Plus
connector
6” Driver
adapter
12” RGB
F-to-M link
LED
Controller
72” interconnection cable
12V Power supply
(connect to power
strip or wall outlet)
Assembly tip: If the LED tape lights do not light up, check polarity
of connectors. They may need to be rotated 180-degrees and
re-plugged in.
4” LED tape
4” LED tape
X2
6” interconnection
cable
6” interconnection
cable
