When not in use, Spectronik recommends that PROTIUM-1000 is reconditioned at least once a month.
1. Set up PROTIUM-1000 as per instructions in Section 3, using a DC electronic load in lieu of your regular load.
2. After the system enters “Running Phase”, set constant voltage (CV) load of 18V and run the system for 1h.
The fuel cell should recover to its maximum rated power output.
PROTIUM-1000 is now ready for usual operation or can be stored again for future use.
CHAPTER 5 | MAINTENANCE & STORAGE
5
MAINTENANCE AND STORAGE
5.1 MAINTENANCE FOR PROTIUM-1000
5.2 STORAGE
Keep PROTIUM-1000 in an open, cool (standard room temperature of 25
o
C) and dry place.