Spectron Relion-MR-Exm, Operating Manual

Page: 9 / 13

FORBIDDEN!
Use of abrasive materials, solvents or other aggressive liquids.
To touch the monitor screen with sharp or hard subjects.
Monitor cleaning shall be performed as follows:

Clean the body of the monitor and the screen with lightly wet soft tissue;

Clean the monitor and body from grease and finger prints with soft mild detergents.
3.4 Labelling
Monitor labelling shall contain the following information:

manufacturer’s name or logo;

nomenclature, conventional names and names;

ex-proofing labeling;

name of the explosion proofing certification organization and the certificate number;

environmental protection level;

power voltage;

date of issue;

factory number;

unified mark of product rotation in the market of the Customs Union member states;

special explosion safety mark;

marks of compliance with certification systems.
4 PRODUCT ASSEMBLY
ATTENTION!
Installation and connection of the monitor shall be performed by authorized personnel only.
4.1 Installation site finding

The monitor installation site shall correspond to the design arrangement;

to perform scheduled maintenance and emergency operations, easy access to the monitor shall be
provided.
4.2 Monitor assembly
Prior to installation, perform visual examination of the unit.
The body, cable gland and screen glasses shall not have any damages. Make sure the cover sealing of
the switching compartment at the back of the monitor is intact. Check for availability of all fastening
elements (bolts, nuts, washers).
Cabling and wiring operations, as well as earthing of the monitor, shall be performed in compliance
with the design project and the requirements of the Electrical Installation Code. Types of cables and
wires, as well as methods of cabling and wiring, shall be chosen with due regard to explosion-hazard area
class.
The monitor is mounted at the walls or other structures in the rooms in locations, that are not subject to
any mechanic influence: shocks, vibration, etc. Provide protection from dirt and dust in dusty production
areas.
Assembly and connection:

Install the swivel arm bracket at the designed location. The bracket has 6 holes of 14mm in
diameter (Fig. 1) for installation.

Follow precautions to keep the monitor screen safe and do not scratch the monitor body, place the
monitor face down to a flat soft surface;

Open the terminal chamber at the back of the monitor (Fig. 5);