![Spectron Relion-MR-Exm Operating Manual Download Page 8](http://html.mh-extra.com/html/spectron/relion-mr-exm/relion-mr-exm_operating-manual_1344171008.webp)
Language
Language menu change.
Note.
Selected language is only the screen menu
language. It does not affect the computer program.
Position
Menu position adjustment.
Default
Returns screen menu to the default position.
Custom
• Horizontal: moves
the screen menu horizontally.
• Vertical: moves the screen menu
vertically.
Save
• Save user settings
of the menu position.
Reset
• Cancel
• Reset
Restore initial settings
Accessibility
Button inquiry frequency change and adjustment of the
menu stand-by time.
Button repeat rate
Use buttons
or
to change the parameter.
• OFF
• Default
• Slow
Menu time out: sets the time (starting with the last
press of the button), for activation of the screen menu.
Exit
Exit from the menu.
3.3
Safe operation requirements
Assembly and operation shall be performed in compliance with the Operation Manual requirements,
chapter 7.3 “Electric installation Code”, GOST 30852.0.
Onsite assembly/disassembly, maintenance and repair operations of the monitor shall be performed in
compliance with the safety regulations specified for the facility. Maintenance personnel shall be
responsible for occupational safety.
When communication cables are installed, the following rules must be followed:
the communication line shall be located at distance from power cables, the communication line
cable shall cross the power cable at right angle;
when using shielded cables, shield earthing shall be reliable and shall be made only in one point.
In compliance with GOST 12.2.007.0-75, the monitor with power voltage up to 48V refers to III
protection class – unit operated at extra-low safety voltage.
Explosion safety of the monitor is provided by:
type of ex-proofing - “M” compound;
composition of the material which is used for production of the monitor complies with GOST
30852.0 for electric equipment of group I and II for different areas;
in normal operation, outer surface heating temperature does not exceed temperatures
recommended for electrical equipment of the corresponding temperature class (T6) as per GOST 30852.0