SpectraPure®Inc
.
Fax 480.894.6109 Fax us toll-free 1.877.527.7873
E-mail: [email protected] Visit us on the web www.spectrapure.com
3
SpectraPure
®
- SYSTEM DESCRIPTION -
The Producer™ RO System is a three stage reverse osmosis system.
1. First, the incoming feed water is passed through a Carbon Tank pre-filter.
This filter removes organics and chlorine from the feed water that can
damage the membrane.
2. The second stage of filtration is a 0.5 micron Sediment pre-filter. This filter is
required to remove excess turbidity (particulate matter) that may
cause the membrane to plug.
NOTE: At this point you can add an (optional) Water Softener to increase
the membrane life
3. The third filtration stage of the system is a high rejection thin film composite
(TFC) reverse osmosis membrane. It removes over 98% of most inorganic
salts, all micro-organisms and almost all high molecular weight organics in
the
water.
Fig. A: Filter Diagram
Carbon
Tank
Pressure
Gauge
.5 micron
MicroTec™
Sediment
Pre-Filter
OPTIONAL
Big Blue 2-Stage DI
Add-On w/ TDS meter
Mounting Clips
OPTIONAL SVC
(Solenoid Valve Controller)
Tap
Water
IN
OUT To
Membrane
Membrane
Optional
Back
Flush
Valve
