SpectraPure®Inc.
480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
SpectraPure
®
9
Note: At least 2 gallons (7.57 liters) of purified water will be discarded during the flushing
before you can collect purified water for use.
Upon start-up, air may be trapped in the DI cartridges (housing may not appear full), this is a
normal condition and it will not affect the operation of the DI system.
STEP 11: CONNECT BULKHEAD FITTINGS:
(Bulkhead Fitting MUST be installed on the same container that the floats are on, SEE DIAGRAM ON PAGE 7)
METER #1
IN: Tap Water
OUT: RO Water
3/8” BULK HEAD FITTING: Use a paddle bit and carefully drill a 13/16” hole for installation at the
bottom of the reservoir (below the low level float).
1/4” BULK HEAD FITTING: Use a paddle bit and carefully drill a 5/8” hole for installation at the top
of the reservoir (above the high level float).
METER #2
IN: MaxCap Water
OUT: Silica-Buster Water
