SpectraPure
®
SpectraPure
®
Inc.
480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
8
SYSTEM INSTALLATION & INITIALIZATION:
1. Most of the components of this system are plastic and are subject to
damage by ultraviolet light from the sun and other sources such as
metal halide lighting.
2. Avoid installing this unit in an area where it may be subjected to
bright light or direct sunlight, as algae is more likely to thrive inside
the clear filter housings when exposed to bright light.
3. The unit must be kept out of areas that are subject to freezing
temperatures.
4. High temperatures greater than 100° F (38° C) must be avoided. If
the unit is used outside, avoid putting the system in direct sunlight
or connecting it to a garden hose that may be exposed to sunlight.
5. Attach the garden hose adapter
(connected to the black
tubing)
to your cold water source. Never run hot water
(greater than 113° F/45° C) through the system.
6. Place the
yellow concentrate (waste) tubing
and the
blue
purified (product) water tubing
temporarily into a drain. Do not
restrict flow from these lines.
7. Open the cold water supply valve. The pressure should not exceed 80
psi .
8.
Check the system to ensure that all fittings are tight and leak-
free before leaving the system unattended. (If anything is
leaking, contact SpectraPure for assistance.)
NOTE:
It is recommended that at least 2 gallons (7.57 liters) of
purified water be discarded now before collecting purified
water for use. If the unit is not used for several days, run the
system for about 10 minutes before collecting any water.
This will flush out any stale water in the system.
9. Finish the installation by directing the yellow line to a drain.
10. Direct the blue line to a collection reservoir.
