background image

SpectraPure

®

SpectraPure

® 

Inc.

  

480.894.5437   Call us toll-free  1.800.685.2783    

2167 East Fifth St,    Tempe, Arizona   85281

24

TERMS AND CONDITIONS:                                                                              

1.  Shipping charges on units or parts submitted to our facility for repair or 

replacement must be borne by the registered purchaser. After repair or 
replacement, the factory will return the unit or part freight prepaid to the 
customer. 

2.  We assume no warranty liability in connection with our equipment other 

than as herein specified.

3.  This warranty is in lieu of all other warranties expressed or implied, including 

warranties of fitness for a particular purpose. 

4.  We do not authorize any person or representative to assume for us any other 

obligation on the sale of our equipment. This is the exclusive remedy and 
liability for consequential damages under any and all warranties which are 
excluded to the extent exclusion is permitted by law. 

5.  Proof of original purchase date must accompany all warranty claims. 

6.  SpectraPure, Inc. reserves the right to change prices without notice when 

necessary. All prices in the catalog are quoted in US dollars. 

7.  Claims for error in quantity or condition must be made within 10 days of 

receipt of material. SpectraPure, Inc. will not be responsible for any claimed 
shortages not reported within 10 days. Returns other than warranty claims 
may be subject to 20% restocking fee.

8.  SpectraPure, Inc. cannot be held liable for damage or loss to a shipment by 

a freight carrier. Check shipment for damage before acceptance or note on 
freight bill subject to inspection for concealed damage. Consignee must file 
claim. SpectraPure, Inc. will offer as much assistance as possible.

9.  A complete credit check is required prior to shipping on a Net 30 or “C.O.D. 

- CUSTOMER CHECK ACCEPTABLE” basis. In the interim period during which 
credit references are being evaluated, all orders must be shipped “C.O.D. - 
CERTIFIED FUNDS” (cash, cashiers check or money order).

10.  All returned checks (due to insufficient funds or closed accounts) will be 

subjected to a

 $25 penalty charge. 

11.  Invoices on Net 30 accounts not paid within 30 days of shipment will 

be considered delinquent and will accrue Finance charges at the rate  
of 1.5% per month  (18% per annum)

.

Summary of Contents for CSPDI-180-AF





























Reviews: