SpectraPure CSPDI-180-AF, Installation And Operating Manual

Page: 5 / 28

SpectraPure
®
Inc .
Fax 480.894.6109 Fax us toll-free 1.877.527.7873
sales@spectrapure.com www.spectrapure.com
5
SpectraPure
®
GENERAL SYSTEM DESCRIPTION:
This SpectraPure ® RODI System gives you a continuous supply of sparkling
clear water. The reliability with the SpectraPure ® Water Treatment System is
greatly improved over other systems. Costly maintenance can be avoided,
providing high quality water at your fingertips.
The incoming feed water from a cold water source is directed through
BLACK tubing with an inline ball valve and is first passed through a
sediment prefilter. This filter is used to remove excessive turbidity, sand,
dust, silt, etc., that would otherwise cause the carbon filter to plug up.
The next stage of filtration is the carbon block prefilter. This filter is used to
remove organics and chlorine from the feed water that can damage the
membrane. The next stage of the system is the RO membrane.
Household water pressure is used to force tap water through the
semipermeable RO membrane. The membrane only allows the purest of
water molecules to pass through it while over 98% of
most inorganic salts,
all microorganisms and almost all high molecular weight organics in the
water
are rejected by the membrane and sent down the drain.
This RODI system has a one stage Deionization cartridge that polishes the
RO water to less-than-one ppm purity. This is
our SilicaBuster™ Extended
Life Super DI cartridge.
The CSPDI RODI system comes equipped with a three-probe Inline TDS
meter. The TDS meter can monitor three steps in the purification process.
Line 1 of the meter shows the tap water TDS. Line 2 of the meter shows
the TDS of the RO water. Line 3 of the meter shows the TDS of the final
product water (out of the SilcaBuster DI).
A pressure-operated Shutoff Valve and a Float Valve are provided for
convenient filling of a storage reservoir.
A Manual Flush Valve (-MF) can be used to periodically rinse the
accumulated impurities and concentrated waste water from the surface of
the RO membrane to help increase the life of the membrane.
An Automatic Flush System (-AF) can be used to periodically rinse the
accumulated impurities and concentrated waste water from the surface of
the RO membrane to help increase the life of the membrane.