Spectramed 01AS80 User Manual Download Page 3

01

22

Chapter

 

1

 

Introduction

1

.

1

 

Product

 

Summary

The  Aspire2 is an advanced sEMG biofeedback and electrical stimulation com-
bination device with gaming technology designed for the rehabilitation needs of 
people with disorders that impact nerve and muscle function.

The stimulator will be utilized for the rehabilitation of muscle function. The stimulator 
detects and monitors the weak EMG signal of patient and delivers an electrical 
pulse according to EMG signal strength to stimulate the patient to achieve a muscle 
contraction.  With  multiple  training  modes  and  interactive  gaming  applications, 
patients can actively participate in the rehabilitation process and receive the treat-
ment with greater enjoyment and personalization. The stimulator is also equipped 
with  an  evaluation  function  to  establish  baseline  data  and  threshold  as  well  as 
track  rehabilitation  progress  to  help  medical  professionals  customize  evidence 
based, objective and effective rehabilitation treatment programs for each patient.

1

.

2

 

Main

 

Innovations

1. Technology of self-EMG signal acquisition and processing;
2. New generation of real-time biofeedback functional electrical stimulation 
    technology based on EMG signal and muscle strength;
3. iPad interactive games training and rehabilitation therapy applications (APP);
4. Multiple rehabilitation training modes in the APP.

Warranty 

Spectramed,  Inc.  provides  a  warranty  to  the  original  purchaser  that  this  product 
will be free from defects in the material, components and workmanship for a period 
of 1 years from the date of purchase [invoice date]. If Spectramed, Inc. are satisfied 
that the product/s is defective the purchaser may return this unit/s to Spectramed, 
Inc. or the appointed distributor for repair or replacement with a new unit. All returns 
must first be authorized by Spectramed, Inc. in advance. The liability of Spectramed, 
Inc.  under  this  limited  product  warranty  does  not  extend  to  any  misuse  or  abuse 
such as dropping or immersing the unit in water or other liquid substance or tamper-
ing with the unit or normal wear and tear. Any evidence of tampering will nullify this 
warranty. 

 

Summary of Contents for 01AS80














Reviews: