SpectraLink NetLink Wireless Telephone, Setup And Administration Manual

Page: 12 / 30

SpectraLink Corporation Setup and Administration–NetLink Wireless Telephone
(With SpectraLink Radio Protocol and NetLink Telephony Gateway)
Admin Menu Items 2
nd
Level 3
rd
Level
IP Address Use DHCP
Static IP
Phone IP
TFTP Server IP
OAI Server IP
Default
Gateway
Subnet Mask
Static Entry
ESS ID Learn Once
Learn Always
License Management Set Current
Restore Defaults
Site Survey Mode
Regulatory Domain
Authentication Open System
Shared Key
Encryption WEP On/Off
Key Information Default Key
Key Length
Key #
Admin PW
IP Address
Select the setting for IP address configuration:
* Use DHCP
: will use Dynamic Host Configuration Protocol to assign an IP
address each time the Wireless Telephone is turned on.
Static IP
: allows you to manually set a fixed IP address. If selected, the next
option will prompt you to enter the IP address designated for this Wireless
Telephone. Enter the digits only, including leading zeroes. No periods required.
ESSID
Select the option that will enable the Wireless Telephone to acquire access points with
the correct ESSID (Extended Service Set ID, aka SSID) each time it is turned on.
Learn Once
: allows the Wireless Telephone to scan all ESSs for its NetLink
Telephony Gateway. Once the NetLink Telephony Gateway is found, the
Wireless Telephone retains the ESSID from whichever access point it associates
with at that point. When overlapping wireless systems exist, the Learn Once
feature allows the Wireless Telephone to power on in any ESSID area and use
only the ESSID established at first learn. This ESSID is retained by the Wireless
Telephone until the ESSID option is reselected.
PN: 72006509B.doc Page 12