www.spectralcomputers.com
User Manual
15
Navigating in the Digital Backup System Manager
1.
To activate the Digital Backup System Manager program, press the Space Bar after system
POST (Power-on-self-testing), but before Windows begins to load.
2.
Enter your password and press Enter to access the main screen of the Digital Backup System
Manager. (If no password has been entered, the password menu will not be shown.)
3.
Navigating in the Digital Backup System Manager DOS screen
•Use the Tab key to move through the screen selections. The selected option will be highlighted.
•Use the Down Arrow key to highlight Backup Points.
•To make a selection or change an option, press Enter.
4.
Using Digital Backup System Manager
Each of the Digital Backup System Manager buttons is in the following pages.
Incremental Backup Points
This option displays a list of all Incremental Backup Points. The first available Backup Point will be
the time at which Digital Backup System was last loaded onto your system. From here you can
choose whether to restore the entire hard drive or the C: drive only.
