©
Spectradyne LLC, All rights reserved
9
Version 2.5.0 Revision 3, July 2020
nCS1 Control and Data Acquisition Software
Software Startup
Starting up the software after the instrument is powered on.
The ‘nCS1 Status’ bar displays
important messages and running processes during a measurement run.
Enter Run Details
Description of fields (see Figure 5):
➢
Cartridge Mold ID:
Enter the cartridge mold ID (e.g., P15.2.3, or E16.1.2.).
➢
Box Number:
First six-digit date code printed on the cartridge box (e.g., 190915-NN).
➢
Save Location:
Use the folder icon to specify a location for saving data.
➢
Data File Prefix:
Specify a prefix for all data files to be saved (optional).
➢
Sample Description:
Enter a sample description, this will be stored with the data file.
➢
Calibration: Size (nm)
: Enter the diameter (in nm) of calibration particles mixed in with
the sample. If no calibration particles are used, the entry may be left blank.
➢
Conc. (1/mL)
: Enter the concentration of calibration particles in particles/mL
(e.g., ‘2E9’).
This entry may be left blank.
Figure 5.
Run Details frame.