TV210V, U, G, W & TV400 V, U, G, W
Spectracom Corporation
TimeView Digital Display Clocks Instruction Manual
2-16
MODE 2
Pressing the Mode switch for the second time advances the setup process
100 place of the Main Group Address. Use the Set button to select the
desired value, 0 or 1.
MODE 3
Sets the 10s digit of the Main Group Address.
MODE 4
Sets the 1s digit of the Main Group Address.
MODE 5
Sets the 100s digit of the Sub-Group Address.
MODE 6
Sets the 10s digit of the Sub-Group Address.
MODE 7
Sets the 1s digit of the Sub-Group Address.
2.5.2 Setting the Buzzer Volume
The buzzer is an optional feature and may or may not be installed on your clock. If it is
not present, skip this step.
MODE 8
Pressing the Mode switch for the eighth time advances the setup process to
set the volume of the buzzer. The first two digits will display
bu
and the
next digit will be 0, 1, 2, or 3. Use the Set button to select the desired value.
0
– turns off the buzzer
1
– lowest volume
2
– medium volume
3
– highest volume
NOTE:
The volume or pitch of the buzzer may change depending on the type of
surface to which the clock is mounted and whether it is held in the hand.
