TV210V, U, G, W & TV400 V, U, G, W
Spectracom Corporation
TimeView Digital Display Clocks Instruction Manual
2-12
2.5
Wireless Clock Configuration
Before placing the TimeView wireless clocks into service, the clocks must be configured
to suit the application(s). The clocks’ configuration options include manually setting the
time, selecting the radio frequency, selecting 12 or 24-display format, and setting
display brightness. In most applications, only the frequency of operation and display
format (12 or 24-hour) will need to be configured.
Configuration selections are made using the Mode and Set switches located near the
center of the rear panel. (Refer to Figure 2-8 to assist in locating the switches on the
210 series clocks). The switches are momentary push buttons and are recessed to
prevent accidental actuation. Use a narrow, blunt-tipped object (such as a “Q”-tip) to
actuate the push button switches.
In the event of a power failure, configuration selections are permanently saved in
EEPROM.
1's seconds
10's seconds
1's minutes
10's minutes
1's hours
10's hours
RF meter
Set
19
Mode
21
22
23
20
12/24 hour
brightness
exit data set
1001-1000-0706
Rev D
10
Mode
12
13
15
14
11
Set
1
100's group
3
4
6
5
2
10's group
1's group
100's sub-grp
1's sub-grp
10's sub-grp
17
18
Mode
8
9
buzzer
7
16
Mode
-
+
Power +12 VDC
Set
MODE SWITCH FUNCTION CHART
10's kHz
100's kHz
1's MHz
100's MHz
1's kHz
Set
10's MHz
Depress Mode switch one time each to scroll through selections
shown in chart above. Depress Set switch to scroll through
numbers indicated on face of clock. Refer to manual for a more
comprehensive description of "Mode" and "Set" switch functions.
RS-485
+
- G
G
-
+
RS-485
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including
interference that may cause undesired
operation.
1001-1000-0708 Rev B
#8-32 THREADED MOUNTING
HOLES FOR BULKHEAD
MOUNTING.
#8-32 THREADED MOUNTING
HOLES FOR BULKHEAD
MOUNTING.
MOUNTING SLOTS FOR
WALL MOUNTING
Figure 2-8: TimeView 210 Rear Panel
