Spectracom
NetClock
NetClock 9483 Option Card Installation Guide, Rev.2
8
Figure 14: Example STATUS/OUTPUTS page – NetClock Web UI
NetClock Web UI, ≥
Version 5.0
Open a web browser, log in to the NetClock Web UI, and navigate
to INTERFACES > OPTION CARDS
:
The new card will be displayed in the list.
•
If the card does not appear to be properly identified, proceed with the System Software
update as described below, and then navigate to
INTERFACES > OPTION CARDS
again to
confirm the card has been detected.
•
If the card has been detected properly, proceed with the Software update as described below
to ensure NetClock and the newly installed card are using the same, latest available version.
Updating the System Software
Even if the newly installed option card has been detected, and even if the latest System Software version
is installed on your NetClock unit, you must (re-)install the software to ensure both NetClock, and the
option card are using the latest software:
•
Follow the System Software update procedure, as outlined in the main NetClock User Manual
under
Software Updates
.
NEXT
: Restore your reference priority configuration, as described in the following topic, and configure
other option card-specific settings, as described in the main User Manual.
