Spektra S.r.l
Spektra S.r.l
Spektra S.r.l
Spektra S.r.l....
-
via Pavia 29, 21052 Busto Arsizio (VA) – ITAL
ITAL
ITAL
ITALY
Y
Y
Y ----
www.spektra
www.spektra
www.spektra
www.spektra----srl.it
srl.it
srl.it
srl.it
7
PROGRAMMING GENERAL PARAMETERS
PROGRAMMING GENERAL PARAMETERS
PROGRAMMING GENERAL PARAMETERS
PROGRAMMING GENERAL PARAMETERS
##NNAMExxxx* setting the unique name of the tracker device
xxxx = vehicle name (maximum 10 characters)
xxxx = VEICOLO1 - (DEFAULT)
##MOVx
enable the shock sensor and set the motion sensivity
x = 0->9
x = 0 function disable (DEFAULT)
x = 1 low sensivity, a long and durable movment is necessary to trigger the
unit.
x = 9 high sensivity, a little movment is enough to trigger the unit.
##F0
GPS receiver in normal operation, the module is switched on during the vehicle
movement and switched off about one minute after the vehicle stops - (DEFAULT)
##F1
GPS receiver always forced to on (only recommended for internal installations)
##LEDx
status LED on board on/off
x = 0 LED always off
x = 1 LED normal operation with various diagnostic flashing - (DEFAULT)
##Ixx
the tracker device continues to store for the time requested, even if there is no
movement. This command allows the user to modify this value based on their
requirements.
xx = 01->99 minutes
xx = 05 minutes - (DEFAULT)
##TMxxxxx
the tracker device stores a GPS point every xxxxx seconds. This command allows
the user to modify this value to adapt it to their requirements.
xxxxx = 00002->65530 seconds
xxxxx = 00005 - (DEFAULT)
##FORMAT
clears all user programming and resets the tracker device to the original factory
settings (an immediate hardware reset of the entire tracker device is also
generated)
##RESET
the immediate restart of the entire tracker device is forced without modifying the
set configurations
##CLEAR-TCP reset the buffer of the memory-points TCP
##CLEAR-SMS
reset the buffer of the memory-points SMS
##CLEAR-ALL
reset the buffers of the memory-points SMS and TCP
##DL-TCP force the download of the buffer memory TCP and wakeup the device
##DL-SMS force the download of the buffer memory SMS and wakeup the device
##WAKEUP
activates the tracker device by simulating a physical movement.
