Spectra FW V1.3, User Manuals

Page: 8 / 10

SPEKTRA S.R.L.
SPEKTRA S.R.L. SPEKTRA S.R.L.
SPEKTRA S.R.L. via pavia 29, 21052 Busto Arsizio (VA) ---- ITALY
ITALY ITALY
ITALY - http://spektra.dyndns.org
http://spektra.dyndns.org http://spektra.dyndns.org
http://spektra.dyndns.org –––– spektra@email.it
spektra@email.it spektra@email.it
spektra@email.it
8
• GENERAL NOTE GENERAL NOTE GENERAL NOTE GENERAL NOTE::::
USE THE ##D1 COMMAND FOR KNOW THE TYPE OF BABI UNIT (BABI-FULL, BABI-LIGHT) AND THE
OPERATIVE MODE PROGRAMMED (MOV, VOX).
THESE ARE TWO TYPICALLY OPERATIVE MODE OF BABI:
“A-BABI LIGHT V1.3 – D1”
BABI IS PROGRAMMED IN MOVEMENT MODE
(##MOVx IS ENABLE, ##VOXxx DISABLE)
AT THE POWER ON YOU WILL SEE 3 LED-FLASHES
“A-MICRO-BABI LIGHT V1.3 – D1”
BABI IS PROGRAMMED IN VOX MODE
(##VOXxx IS ENABLE, ##MOVx DISABLE).
AT THE POWER ON YOU WILL SEE 10 LED-FLASHES
WARNING WARNING WARNING WARNING:::: WHEN BABI IS CONFIGURED IN VOXxx MODE, YOU CAN NOT CALL AND LISTEN IT WITH A PHONE,
ONLY THE BABI THAT CAN CALL YOUR PHONE AT THE PROGRAMMED NUMBER.
WITH THE REMOTE COMMAND “##D4”, YOU CAN SEE THE “CONN_V:x” VALUE:
- “CONN_V :0” MEANS THAT THERE IS NO
THERE IS NO THERE IS NO THERE IS NO A VOICE CALL IN PROGRESS.
- “CONN_V :1” MEANS THAT THERE IS THERE IS THERE IS THERE IS A VOICE CALL IN PROGRESS.
WITH THE REMOTE COMMAND “##D6” YOU CAN SEE:
THE “SIGN:xx” VALUE WHERE xx = GSM SIGNAL LEVEL.
xx = 00 NOT GOOD SIGNAL.(MIN VALUE).
xx = 30 VERY GOOD SIGNAL (MAX VALUE).
THE “MAIN CELL:xxxx….” VALUE WHERE xxxx ARE THE MAIN CELL DATAS ON WICH THE BABI IS
CURRENTLY REGISTERED.
WITH THE “##D7” DEBUG MESSAGE YOU CAN SEE ALL THE OTHER SECONDARY CELL THAT THE BABI IS
LISTENING