SPEKTRA S.R.L.
SPEKTRA S.R.L.
SPEKTRA S.R.L.
SPEKTRA S.R.L.
via pavia 29, 21052 Busto Arsizio (VA) ---- ITALY
ITALY
ITALY
ITALY -
http://spektra.dyndns.org
http://spektra.dyndns.org
http://spektra.dyndns.org
http://spektra.dyndns.org
––––
5
•
GENERAL FUNCTIONS
GENERAL FUNCTIONS
GENERAL FUNCTIONS
GENERAL FUNCTIONS::::
##FORMAT
CLEAR AND DELETE ALL THE USER PROGRAMMED FUNCTION AND SET THE UNIT IN TO
THE FACTORY RESET STATE, THE UNIT WILL ALSO DO AN HARDWARE AND SOFTWARE
RESET.
##RESET
THE UNIT WILL DO AN HARDWARE AND SOFTWARE RESET WITHOUT LOOSING THE USER
PROGRAMMED FUNCTION.
##Qx
THE UNIT WILL GO IN TO THE SLEEP MODE FOR THE TIME LISTED IN THE FOLLOWING
TABLE:
x = 1 -> 15 MINUTES
x = 2 -> 30 MINUTES
x = 3 -> 60 MINUTES
x = 4 -> 90 MINUTES
x = 5 -> 2 HOURS
x = 6 -> 4 HOURS
x = 7 -> 8 HOURS
x = 8 -> 16 HOURS
x = 9 -> 20 HOURS
WHEN THE MESSAGE IS DECODED, THE UNIT WILL SHUTDOWN IMMDIATELY. IF IT IS DISCONNECTED FROM
THE POWER, THE NEXT TIME IT WILL RECONNECTED IT SEEMS IT DOESN’T WORK OR IT IS BURNED. ALSO
THE LED WILL NOT WORK. SO DON’T CONFUSE A SLEEPING UNIT WITH A BURNED OR DON’T WORKING UNIT.
WAIT THAT THE SLEEPING TIME WILL END LEAVING THE UNIT CONNECTED TO THE POWER.
##TRxx
TIMEOUT ON RECALL, IF THE CALL END ABNORMALLY, THE UNIT WILL WAIT THIS TIME
BEFORE
BEFORE
BEFORE
BEFORE TRY AGAIN TO RECALL THE TARGET NUMBER
xx = 00->99 MINUTES
xx = 01 DEFAULT
##L0
THE LED IS ALWAYS OFF
##L1
THE LED IS IN NORMAL WORKING CONDITION WITH VARIOUS DIAGNOSTIC LED FLASH
(DEFAULT)
##RAN
DISABLE ALL THE RECALL FUNCTIONALITY WITHOUT DISABLE THE PROGRAMMED
NUMBERS
