10
Electrical Connections
Aquifer DC Systems
DC powered units
will have a terminal block for con-
necting to your power source. Terminals extend through
the case and power can be connected on either side.
Aquifer Power Pack Solar (PPS) Systems
Solar Power Pack models
have a solar panel that fits into
the lid of the case. Unfold the Panel and connect it to the
charge control with the black connectors.
The AC Power cord for the battery charger is supplied with
a US
-
style plug though it will accept any input voltage
from 100
-
260 Volts AC, 50/60Hz.
Aquifer Power Pack models are shipped with the battery
disconnected. Connect the battery using the large red
connectors.
Note; The best way to store the unit is to leave the
battery charger pugged in to properly maintain the
battery, or the Battery can be fully charged and discon-
nected prior to storage. Leaving the battery connected
will drain it in about 30 days.
On Power Pack models there is a 15
-
Amp fuse, in a water-
tight holder, along the positive battery wire.
Summary of Contents for Aquifer AF-200-DC
Page 2: ...2...
Page 31: ...31...
Page 39: ...39 Parts 1...
Page 40: ...40 PL MTS 3 8X1 2B HP CYL SST HP CYL CCA SO HPP ECCB HP CYL EC HP CYL R HP CYL PT Parts...