3. Press and release button and select >>PlaneLok<<.
4. Press and release button to open the PlaneLok
submenu; then press button to start PlaneLok (PL Y)
.
5. The laser starts to search for the receiver while
all displays show a flashing PL.
The HL760 display shows a flashing –PL–
during the time the laser is searching and
adjusting the beam to the on-grade position.
6. When PlaneLok is complete, –PL– stops flashing
at the HL760 and Laser / RC402N display.
Exiting of PlaneLok can be done by pressing button or any
HL760 button where the unit goes always back to automatic
mode.
Automatic Horizontal - PlaneLok