Engl
ish
33
set a base or start a standalone, static, post-processing
session.
Keeping this box disabled means users will not be
prompted.
Users may enable or disable anti-theft protection at
any time through
Survey
>
Anti-Theft
.
–
Enable
(startup protection): This button allows you to
enable the startup protection.
Before you enable the startup protection, please read
the currently active password shown in plain on the
screen. This is to make sure you will keep it in mind
(you’ll need it to be allowed to use the receiver next
time you turn it on). After the startup protection has
been enabled, the
Enable
button turns into a
Disable
button.
Enabling/Disabling the Anti-Theft Protection
After you have set the receiver’s
Anti-Theft
tab to meet your
requirements, go to the
Survey
menu and then select one of
the following functions:
•
Anti-Theft
: This function shows the current status of the
anti-theft protection (
Enabled
,
Disabled
or
Alarm Raised
). It
can be used to enable or disable the protection at any
time.
You need to enter the password previously defined on the
Anti-Theft
tab before you are allowed to disable the anti-
theft protection. If the theft alarm has been raised, you
can only disable the anti-theft protection.
•
Start Survey
: When you use this function to set an RTK
base, and provided the
Prompt to enable Anti-Theft
box has
been enabled, the anti-theft protection will be enabled
automatically. (A message will warn you that the
protection has been activated and information will be
given to tell you how to disable it.)
Later the protection will be disabled automatically when
you use the
End Survey
function.
•
Start Recording
: When you use this function to start data
recording, and provided the
Prompt to enable Anti-Theft
box
has been enabled, the anti-theft protection will be
enabled automatically. (A message will warn you that the
protection has been activated and information will be
given to tell you how to disable it.)
Later the protection will be disabled automatically when
you use the
Stop Recording
function.
Summary of Contents for SP60 GNSS
Page 1: ...User Guide SP60 GNSS Receiver August 2016 Release...
Page 8: ......
