Chapter 2. Troubleshooting the RXT150
18
Capturing Debug Files with the Serial Interface
Before You Begin
Before using the serial interface, make sure that:
• You have a properly configured terminal emulator, such as TeraTerm.
(HyperTerminal is not recommended for use with the RXT-150.)
• You have a standard DB9 serial cable.
• The terminal emulation settings are set to:
• 115200 bps
• 8 data bits
• No parity
• 1 stop bit
• No flow control
Capturing Debug Files
1.
Connect a serial cable from the host to the RXT150.
2.
Open TeraTerm, or a similar terminal emulation program.
You may need to press the Enter key on your keyboard to display a command
prompt.
3.
Type
cnDiagnosticShell
, then press the Enter key on your keyboard. The
RXT Drive Diagnostics Main Menu (Figure 2-10) displays.
Figure 2-10
The RXT Drive Diagnostics Main Menu.
