Speco O2P30, Owner'S Manual

Page: 37 / 49

Operation and settings
37
- Address: Enter the SMTP server address.
- Port: Enter the port number. The default port is 25.
- Enable SSL: Check when use the SSL (Secure Socket
Layer) protocol. SSL protocol is cryptographic
protocols that provide secure communication on a
network.
- Receiving address: Type the recipients e-mail
address. You can specify only one recipient e-mail
address.
- Administrator address: Type the e-mail address of
the administrator.
- Subject: Enter the subject/title of the e-mail.
- Message: This message can describe the information
of the acquired IP address, etc.
- Test: Select [Test] to test the SMTP server.
3. Click the [Save] button to confirm the settings.
> To edit the SMTP server
1. Choose the SMTP server in the SMTP server list.
2. Click the [Edit] button.
You can check or edit the SMTP server options.
> To delete the SMTP server
1. Choose the SMTP server in the SMTP server list.
2. Click the [Remove] button.
Sensor & Relay
Sensor
> Enable: Check the box if you want to activate the sensor.
> Alias: Displays the sensor name.
> Type: Select the sensor type.
Relay
> Control duration: Enter the relay time.
> Alias: Displays the relay name.
> Type: Select the relay type.
> Control relay
- Run: Click to activate the relay.
- Stop: Click to stop the relay.
• Save: Click this button to confirm the settings.