20
Operation and settings
Special
> 3D-DNR: If pictures are not clear due to noise, this option
would reduce the noise of the image.
> Color: You can switch the displayed picture to gray scale or
color.
- On: To display the picture with color. If you set [On], the
[Color Level] option is activated. Adjust the [Color Level]
value by using a jog controller or enter the desired value.
- Off: To display the picture with grayscale.
> Freeze: Click [On] or [Off] button to set up the [Freeze]
Option.
> Sharpness: The degree to which the boundary of the two
portions is clearly distinguished. Adjust the value by using
a jog controller or enter the desired value. If you set the
sharpness value to higher, the image outline becomes sharp.
If you set to lower value, the image outline becomes dim.
> Stabilizer: The image stabilizer function minimizes the
appearance of shaky images caused by low-frequency
vibration. This function is useful for outdoor surveillance.
Select the [Stabilizer] option and set to [On] or [Off].
> OSD: Click [On] or [Off] button to set up the [OSD] Option.
If you set [On], [Function] and [Zoom MAG] options are
displayed.
- Function: Displays or removes the Function OSD on the
screen. Click [On] or [Off] button to set up the [Function]
Option.
- Zoom MAG: Displays or removes the zoom OSD on the
screen. Click [On] or [Off] button to set up the [Zoom
MAG] Option.
> Camera Version: Displays the software version on the
monitor.
> Camera
- Factory Reset: Clear certain settings and information and
return to factory default settings.
•
Default: Click this button to restore back to original factory
settings.
Summary of Contents for O2P30
Page 41: ...Operation and settings 41...
Page 49: ......
