12
Operation and settings
Storage
General
> Overwrite: If enabled, if the micro SD card has insufficient
space, it will overwrite the oldest data.
> DiskFull Notification: Sends an warning e-mail to the SMTP
server when the micro SD card is full. Select the SMTP server
from the drop-down list. You should register the SMTP
server on the Event server setting to set this function.
> Network Failure Recording: Select the check box to activate
the micro SD card recording function. If the system does
not work with recording server, the system will record the
data to the micro SD Card. When the system connect to the
recording server again, the recorded data of the micro SD
card will transfer to the recording server automatically.
> Recording Server IP: Enter the recording server IP.
> Set as NTP server IP: Click this button to use the entered
Recording Server IP as the NTP server IP.
Note:
•
The recorded file name is made automatically as the
“[Created date of the file]_[GMT Recording Time].AVI”
type.
•
Recorded file on the SD card, is recording 1 frame per
second when set video codec to MJPEG.
Device Management
> Using the micro SD card
1. Insert the micro SD card carefully to the micro SD card
slot of the camera.
2. Click the [Mount] button. If the micro SD card is
mount ed to the system correctly, the [Mount] button will
be changed to the [Unmount] button.
3. Displays the information of the[Disk ID], [Status],
[Capacity] options.
Note:
•
When the micro SD card is mounted, you should format
the micro SD card. After the micro SD card format is
finished, you should click the [Mount] button to use it.
•
When you use the micro SD card format function, it may
not progress immediately. In this case, you should try it
again after waiting a few minutes.
Summary of Contents for O2P30
Page 41: ...Operation and settings 41...
Page 49: ......
